Water Pipe Damage Due to Arcing

Several years ago, it was permissible to “ground” an electrical system by attaching a wire from the grounding strip or terminal inside the fuse or breaker panel to a metallic pipe.  In many older homes and commercial buildings, this is still the case.  The intended purpose of doing so is to channel stray current directly to earth ground in order to prevent injury and damage to people and property.  Stray current can come from electrical problems with appliances, power surge and lightning.  In a recent investigation, a situation was discovered where electric utility wiring was faulty and caused their side of the power supply to a residence to energize the “ground” or neutral side of the supply.  The end result was the creation of several arcs between the ground wire strap and a copper water pipe.  The arcing that occurred was intense enough to burn holes in the piping.  Since the pipe was part of the hot water supply to the home, the home was flooded.  The damage to the pipe is shown in the photo below.   

What’s Going On?

Just completed an investigation into why the mast of a rock drilling machine came crashing down on the machine with no warning.  If you’ve ever seen a rock drilling machine, they are equipped with a mast that rests in a horizontal position and can be raised into a vertical position for drilling.  In this particular case, the mast was in the process of being lowered when four bolts failed at the pivot points where the mast rotates from the vertical to horizontal.  Looks like it was just one of those unfortunate things that happens.  Currently conducting an investigation into why the electrical system in a cement mixing truck appears to have short circuited and burned some of the wiring.